“EVO” External I-Type Adapter
$65.00
This product can only be shipped to North America, Europe, and the Asia-Pacific (including Oceania). If you are located outside of these areas, we recommend contacting us before place the order.
- Payment is secured by Airwallex
According to common sense, Polaroid remove the built-in battery from the 600 film pack, then created the i-Type film. When using i-Typefilm on the old SX-70 or SLR680 camera, an external power source must be applied to the camera.
Our “EVO” adapter can serve as an external power supply unit, make sure the camera will work with i-Type film.
Notice: The camera in pictures not included.
Installation Instructions
This product utilizes the factory-provided test holes present on every camera, which are typically concealed beneath the leather covering. You will need to locate these two holes; please refer to our tutorial for detailed instructions.
(This product is available for purchase; the user manual will be provided by October 26.)
Specifications
| Battery Capacity: | 3.7V 550mAh Lithium-ion (non-replaceable) |
| Output Voltage: | 5.9V–6.0V DC |
| Operating Temperature: | -5°C to 40°C (23°F to 104°F) |
| Overcurrent Protection Threshold: | 6A (includes short-circuit protection) |
| Battery Level Indicator: | 4 LEDs (each representing 25% capacity) |
| Charging Port: | USB-C |
| Overheat Protection: | Included |
| Charge/Discharge Protection: | Prevents overcharging and over-discharging |
| Laboratory-Tested Capacity: | 60 exposures |
Usage Precautions
- Protect the pogo pins from impact.
- Avoid storing in extremely cold or high-temperature environments. Keep the camera folded while charging, and do not use the camera during the charging process. Do not place the device in insulated or heat-retaining environments while charging.
- Do not disassemble the device; do not subject the battery to impact or puncture it.
- If the battery appears damaged or becomes loose, the entire adapter must be disposed of in accordance with local environmental regulations.
- This is not a toy. It is designed exclusively for use with SX-70 series cameras.
- Do not store the device alongside metal wires or other objects that could cause a short circuit.
- This product comes with a 180-day warranty; users are responsible for shipping the unit to us for service.
- This product cannot be placed in checked baggage when traveling by air. Some airlines may also prohibit carrying it in the compartments.
- Users should remain mindful of any additional safety precautions not explicitly mentioned here. We assume no liability for hazards resulting from improper use or other misuse.
